Flush Cut Tapered Quick Release Sealant Cutter

More Views

Flush Cut Tapered Quick Release Sealant Cutter

This Flush Cut Tapered Sealant Cutter is excellent for the removal of silicone caulking or soft adhesives. The full knife edge profile allows this blade to penetrate and cut pliable materials cleanly away from a base surface.

Sku: Q035

  | 

Availability: In stock

US $5.99
  • Buy 3 for US $3.99 each and save 34%
  • Buy 10 for US $3.49 each and save 42%
  • Buy 30 for US $2.99 each and save 51%

Best for cutting

removing deeper seated silicone, caulking & soft glue

Blade Width

1-1/4 inch to 1/4 at tip X .032 inch material thickness

Material

High Carbon Steel

TPI (Teeth Per Inch)

N/A

Plunge Depth

2 inch

Use this flush cut tapered sealant Quick Release cutter to remove adhesives, soft caulking, silicone or any other gummy material away from a desired work surface. The long sharp knife edges on both sides are quite capable of deep separation of bonded materials.

The step-down flush-cut profile design allows the operator to lay the blade flat on a working surface for a consistently controlled scraping action.

Special Alert for Bosch MX30E & MXH180B model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT suitably lock-fit onto your Bosch Tool-less Blade change multi-tool model without our C-Clip Adapter.

Special Alert for Dremel MM40 / MM45 model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT suitably lock-fit onto your Dremel Tool-less Blade change model without our C-Clip Adapter.

Special Alert for Black & Decker 'Matrix' & Craftsman 'Bolt-On' model owners: Please be aware that this item will NOT suitably pin-lock into your cordless drill when utilizing the optional multi-tool head.

These blades or attachements are compatible with the following machines:

  • DeWalt
  • Dremel MM40 & 45 with our C-Clip Adapter
  • Genesis all models (with blade change lever)
  • Green Tech Power Multitool
  • Integra PRO Multi Tool
  • Mastercraft Maximum Multi-tool
  • Parkside PMFW 310 C2 (with blade change lever)
  • Porter Cable all models (round or square blade pins)
  • Rockwell Hyperlock
  • Triton Multi-Tool
  • 'Velocity' by Dremel
  • Worx Hyperlock
  • Black & Decker
  • Stanley Fatmax
Quick Release Hybrid design also compatible with:
  • Most Multi-Fit Standard listed machines