1-3/8" Tungsten Carbide Hexagon Anchor Saw Blade

Our new 'Hexagon Anchor' looking blades are compatible with the new Fein, Festool, Bosch, Flex, Hilti and Makita Starlock or StarlockPlus machines.  'Starlock' machine models utilize a 'bottlecap' looking blade attachment interface and our new 'Hexagon' shaped anchors fit perfectly.

This 1-3/8 inch wide Tungsten Carbide 'Hexagon Anchor' Saw blade is primarily for cutting hardened metals.  This cutter will get you through tough metal cuts that our Titanium blades just cannot do.  Handymen........you need have at least one of these Tungsten Carbide cutters in your tool box.

Titanium blades are great all-purpose cutters but they cannot handle hardened metals.  This new Tungsten Carbide saw blade may not cut fast but it'll get you through tougher ferrous metal cuts.

Use this blade to cut through cast iron pipes, Sheetrock screws, lag-bolts, concrete nails, small padlock shackles etc.  With this Tungsten Carbide blade you can tackle most tough metals. 

ALERT: Due to the high forces generated with this blade, it is important that the material you're cutting not move or vibrate when sawing.  Please strongly secure your cut material before using this Tungsten Carbide blade.

ATTENTION: When sawing hard metals with this Tungsten Carbide blade please try to maintain smooth cutting contact between the blade's teeth and the metal to be cut.  While operating do not allow the blade teeth to jump and bounce against the cut surface.  Shock loads and bounces will severely shorten the life expectancy of this blade.  Employ a smooth and gentle left-to-right swing as you cut, this will get all of the blade's cutting teeth working for you.

Our Hexagon Anchors blades are also compatible with the older Fein Multimaster, Bosch and Makita Multi-Tool models.

Special Alert for Dremel MM35, MM40, MM45, MM50 & Velocity model owners: Please be aware that these closed anchor Hexagon style accessories will NOT suitably fit your Quick Release Tool-less Blade change Dremel models.  

Attention 2019 and newer Craftsmen #CMEW400 & #CMCE500D1 model owners: Please be aware that this closed anchor Hexagon style accessories will NOT fit your blade change system.  Please select from our Quick Release Arbor Category.