My Cart(Items) 
Commercial Glass Panel 'Slim Neck' Quick Release 'L' Blade
Commercial Glass Panel 'Slim Neck' Quick Release 'L' Blade
- Buy 3 for US $18.99 each and save 14%
- Buy 10 for US $16.99 each and save 23%
Additional Information
| Best for cutting | Separating commercial glass panels from sealants. Facilitate window glass removal from the frame |
|---|---|
| Blade Width | .25 inch wide X .055 inch material thickness |
| Material | Stainless Steel |
| TPI (Teeth Per Inch) | n/a |
| Plunge Depth | 3-1/8 inch |
This niche application commercial glass de-glazer is a long neck 'L' shaped blade with a 1-3/8" long bent leg that tapers to a point. This blade is designed for deep reaching into the perimeter gaps around the window edges of commercial building 'curtain wall' glass panels to facilitate separation from the bonding sealants.
Having double sharpened knife edges on both sides from the 'L' bend to the tip, this blade also utilizes edge serrations for aggressive sealant removal in both cutting directions.
This aggressive long necked blade is only recommended for use with robust multi-tool machines operating with sufficient power amperage.
Please Note: This blade is NOT for automobile windshield removal applications. Use only for commercial glass panel de-glazing situations where the bonding sealants are accessible by this blade's profile.
WARNING: Please take note: This extra long cutter is only recommended for experienced multi-tool users. Longer blades put higher working loads on your multi-tool. Please listen to your machine when using this cutter to avoid motor stalls or burnout failure.
Special Alert for Bosch MX30E & MXH180B model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT suitably lock-fit onto your Bosch Tool-less Blade change multi-tool model without our C-Clip Adapter.
Special Alert for Dremel MM35, MM40, MM45 & MM50 model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT lock-fit onto your Dremel Tool-less Blade change model without our C-Clip Adapter.
Special Alert for Black & Decker 'Matrix' & Craftsman 'Bolt-On' model owners: Please be aware that this item will NOT suitably pin-lock into your cordless multi-tool head.
Special Alert for new Bosch StarLock & Fein StarLock model owners: Please be aware that this item and any of our other accessories, will NOT fit your 2016 or newer machines if utilizing the new 'bottle-cap' style blade anchoring system.
These blades or attachments are compatible with the following machines:
- Benchmark models (with blade change lever)
- Craftsman (all models except 'Bolt-On')
- DeWalt
- Dremel MM35, MM40, MM45 & MM50 with our C-Clip Adapter
- Dremel Velocity
- Genesis all models (with blade change lever)
- Green Tech Power Multitool
- Hercules 3.5 amp Multi-Tool
- Integra PRO Multi Tool
- Kobalt Oscillating Tool Kit
- Mastercraft Maximum Multi-tool
- Parkside PMFW 310 C2 (with blade change lever)
- Porter Cable all models (round or square blade pins)
- Rockwell Hyperlock
- Triton Multi-Tool
- Worx Hyperlock
- Black & Decker
- Stanley Fatmax
- Most Multi-Fit Standard listed machines