1 Inch Quick Release 'L' Shaped Windshield Glass Blade

More Views

1 Inch Quick Release 'L' Shaped Windshield Glass Blade

Use your multi-tool to assist with the task of removing your car's windshield. This 'L' shaped tapered blade has the ability to cut pliable sealants to facilitate the removal of glass panels embedded in urethane.

Sku: Q7206-3cm

  | 

Availability: In stock

Regular Price: US $19.99

Special Price US $11.99

  • Buy 3 for US $9.99 each and save 17%
  • Buy 10 for US $8.99 each and save 26%

Additional Information

Best for cutting separating window glass from sealants. Facilitate auto glass windshield removal from frame.
Blade Width double sharpened tapered bent knife end 1-1/8 inch long X 1/2 inch wide X 0.057 inch material thickness
Material Stainless Steel
TPI (Teeth Per Inch) N/A
Plunge Depth N/A

This specialty 'L' shaped blade has a 1-1/8" long bent leg that tapers to a point. It's designed for plunge cutting into auto glass sealants to facilitate your 'do-it-yourself' windshield removal project.

Having a sharpened knife edge front and back, this blade also utilizes a serrated knife edge on one side to assist with thicker sealant zone cutting.

Best suited for slicing urethane sealants around the windshield glass edges, accessible by this blade's profile.

This blade is also good for cutting the sealant around your circular shaped boat cabin windows.

ATTENTION: Extend the cutting effectiveness of your 'L' blade by keeping the knife edges sharp and spraying soapy water into the cut zones. Set your machine speed to high and guide the knife end along the inside glass surface.  This allows the blade to get a scissor cutting action going against the glass.

Attention: First time users who need to remove a good windshield without cracking for a same glass reinstall, should practice a few times first.  Each user needs to establish their most comfortable speed and machine hold technique for a clean removal.

WARNING: Please take note: This cutter is only recommended for experienced multi-tool users. Even slightly aggressive cutting of urethane sealants will put extremely high working loads on your multi-tool.  Please listen to your machine when using this cutter to avoid motor stalls or total burnout failure.

Special Alert for Bosch MX30E & MXH180B model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT suitably lock-fit onto your Bosch Tool-less Blade change multi-tool model without our C-Clip Adapter.

Special Alert for Dremel MM40, MM45 & MM50 model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT suitably lock-fit onto your Dremel Tool-less Blade change model without our C-Clip Adapter.

Special Alert for Black & Decker 'Matrix' & Craftsman 'Bolt-On' model owners: Please be aware that this item will NOT suitably pin-lock into your cordless multi-tool head.

Special Alert for new Bosch StarLock & Fein StarLock model owners: Please be aware that this item and any of our other accessories, will NOT fit your 2016 or newer machines if utilizing the new 'bottle-cap' style blade anchoring system.

These blades or attachements are compatible with the following machines:

  • Craftsman (all models except 'Bolt-On')
  • DeWalt
  • Dremel MM40, MM45 & MM50 with our C-Clip Adapter
  • Dremel Velocity & MM35
  • Genesis all models (with blade change lever)
  • Green Tech Power Multitool
  • Integra PRO Multi Tool
  • Kobalt Oscillating Tool Kit
  • Mastercraft Maximum Multi-tool
  • Parkside PMFW 310 C2 (with blade change lever)
  • Porter Cable all models (round or square blade pins)
  • Rockwell Hyperlock
  • Triton Multi-Tool
  • Worx Hyperlock
  • Black & Decker
  • Stanley Fatmax
Quick Release Hybrid design also compatible with:
  • Most Multi-Fit Standard listed machines